• Highlights
  • Specifications
  • Accessories
  1. SAS to SAS RAID subsystem
  2. Two (2) SAS 4x wide host ports
  3. Hardware RAID6 XOR engine by dedicated ASIC400 chipsets
  4. Superior performance with uncomplicated connectivity
  5. 12 SAS disk drives
  6. Expansion to 60 drives via one (1) 4x wide expansion port
  7. Expansion enclosure : S12S-J1000-G (JBOD)
See details about expansion enclosures:S12S-J1000-G (JBOD)
How-to-Drive Interface Configuration SAS Expansion Form Factor
SAS to SAS Single Controller Yes 2U Rack-mount
RAID Controller
  1. Hardware RAID5 & RAID6 parity computation
  2. Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
  3. RAID Migration
  4. Configurable stripe size and write policy per array
  5. Multiple Global, Dedicated, & Enclosure-specific hot-spares
  6. Intelligent Drive Handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Host Interface
  1. Two (2) SAS 4x wide port
  2. 12Gb/s bandwidth via SFF-8470
  3. Concurrent I/O commands
  4. Tagged command queuing up to 256
Drive Interface
  1. Twelve (12) 3.0Gbps SAS, hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SAS disk drives
  3. S.M.A.R.T. and NCQ support
  4. Automatic bad-sector reassignment
  5. Dedicated bandwidth to each connected drive
  6. Proprietary enclosure service support through the expansion link
  7. MUX kits with port selectors for dual-controller access to SATA drives
System Components
  1. Heavy duty (High desity) 2U enclosure
  2. Single RAID and I/O management controller module
  3. Fault-tolerant modules interfaced through a common backplane
  4. One (1) 512MB DDR DIMM module (default, supports up to 2GB in size)
  5. Redundant, hot-swappable 460W power supply units
  6. Redundant, dual-speed cooling modules
  7. Twelve (12), hot-swappable drive trays
  8. Two (2) forearm handles
  9. Optional Li-Ion battery backup unit (BBU), life expectancy and charge level aware
Management
  1. COM1 serial port for local access to firmware-embedded utility
  2. COM2 for UPS connection
  3. GUI, Telnet, and SSH system monitoring via Ethernet
  4. Java-based SANWatch software
  5. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  6. Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  7. LCD keypad panel to all configuration options
  8. Variable logical drive options per DIMM size
  9. Module status LED indicators:
    1. Two (2) per drive tray
    2. Seven (7) per controller module
    3. One (1) per power supply unit
    4. One (1) per BBU module
    5. Two (2) per cooling module
    6. Presence detect & thermal sensors via I2C bus

Physical/Electrical

Interfaces
  1. Two (2) SAS 4x host ports each with 12Gb/s bandwidth
  2. One (1) SAS 4x Exp. port each with 12Gb/s bandwidth
  3. One (1) Fast Ethernet management port
  4. Two (2) serial COM ports (38400, n, 8, 1)
Power Supply Module

Two (2) redundant hot-swappable power supplies with PFC

Input 100VAC at 8A, 240VAC at 4A with PFC (auto-switching)
50 to 60Hz
Output (Maximum output: 460 Watts)
+12.0V 24A max.
+ 5.0V 36A max.
+ 3.3V 32A max.
Cooling Module
  1. Redundant dual-thermal-fan cooling modules
  2. Maximum Air Flow: 13 m3 /min (high speed); 0.9 m3/min (low speed)
Environmental Specifications
Temperature: Operating: 5° to 40°C (35°C if battery is applied)
Non-operating: - 40° to 60°C (-40° F to 140° F)
Relative humidity: 5 to 95%, non-condensing
Altitude: Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft
Dimensions:
  1. Chassis without handles: 446(W) x 88(H) x 490(D) mm
  2. Chassis with handles: 482 (W) x 88(H) x 505(D) mm
  3. Package: 381H x567W x 772D mm
System weight (w/o drives):
  1. Net weight: 23.5kg
  2. Gross weight: 25kg

Spare Parts

IFT-9273CDTray Drive tray, Type-III bezel and Type-II LED lightpipe
IFT-9275ECPSU Power supply module, for ES 2U-R series subsystem, 460W capacity
IFT-9275CFanMod Cooling fan module, for ES 2U-R subsystems
IFT-9272CHandLLCD Left-side forearm handle, for ES 2U series subsystems, LCD panel included
IFT-9272CHandR Right-side forearm handle, for ES 2U series subsystems
IFT-85S10GE12 SAS to SAS RAID controller module, for S12S-G1030 subsystem, 2 x (SAS 4x) host ports, SAS Exp.
IFT-85S10GE12M5 SAS to SAS RAID controller module, for S12S-G1030 subsystem, 2 x (SAS 4x) host ports, SAS Exp., 512MB DDR RAM
IFT-9011 Null Modem, DB9 female to DB9 male, wires swapped
IFT-9270ASCab RS-232C serial cable, audio-jack to DB9
IFT-9270CmSASCab4 SAS external cable, MiniSAS 4X(SFF-8088) to Infiniband 4X(SFF-8470, thumbscrew type), 120 Centimeters
IFT-DDRESCEM5 512MB DDR RAM DIMM module for ASIC400 Platform.

Accessories

IFT-9272CDTrayDmy Dummy Drive tray, Type-II bezel
IFT-9275CBTE Battery cell pack, Li-Ion, for ES 2U-R subsystems, BBU ID, high capacity
IFT-9270CUPSCab UPS cable, audio-jack to DB9
IFT-9270CSASCab02 SAS external cable, Infiniband 4x to Infiniband 4x, 120 centimeters
IFT-9272CESlide28 Enhanced Slide rail assembly, for ES 2U series subsystem, 25"~28" rack depth
IFT-9272CESlide36 Enhanced Slide rail assembly, for ES 2U series subsystem, 32 "~36" rack depth
IFT-DDRESCEMA 1GB DDR RAM DIMM module for ASIC400 Platform.
IFT-DDRESCMB 2GB DDR RAM DIMM module for ASIC400 Platform.